Difference between revisions of "WHO=13 - Device Communication"
Jump to navigation
Jump to search
(Add DIMENSION codes found by experiment, missing from current official documentation.) |
|||
| Line 8: | Line 8: | ||
My device is shown as '''12''', looking up in the Device Table below, the device must be a F453AV | My device is shown as '''12''', looking up in the Device Table below, the device must be a F453AV | ||
| − | == | + | == DIMENSION Table == |
{| class="wikitable" | {| class="wikitable" | ||
| − | ! style="text-align:left;"| | + | ! style="text-align:left;"| DIMENSION |
! style="text-align:left;"| Description | ! style="text-align:left;"| Description | ||
! style="text-align:left;"| R/W | ! style="text-align:left;"| R/W | ||
| Line 71: | Line 71: | ||
|} | |} | ||
| − | The following | + | The following DIMENSION codes are '''not''' mentioned in the official documentation. However when looking at the results of requests using these codes their meaning seems obvious. |
{| class="wikitable" | {| class="wikitable" | ||
| − | ! style="text-align:left;"| | + | ! style="text-align:left;"| DIMENSION |
! style="text-align:left;"| Description | ! style="text-align:left;"| Description | ||
! style="text-align:left;"| R/W | ! style="text-align:left;"| R/W | ||
Revision as of 14:52, 23 November 2014
WHO 13 let's you communicate with your gateway or scenario manager.
We start with an Example
To find out what type of gateway and/or scenario manager you have, just send the message *#13**15## to your device, for example:
echo "*#13**15##" | netcat 192.168.60.201 20000
This gives you a similar answer like this:
*#*1##*#13**15*12##*#*1##
My device is shown as 12, looking up in the Device Table below, the device must be a F453AV
DIMENSION Table
| DIMENSION | Description | R/W | Syntax |
|---|---|---|---|
| 0 | Time | R/W | Get Time: *#13**0## Set Time: *#13**#0*H*m*S*T## |
| 1 | Date | R/W | Get Date: *#13**1## Set Date: *#13**#1*W*D*M*Y## |
| 10 | IP address | R | Get IP address: *#13**10## |
| 11 | Net mask | R | Get Net mask: *#13**11## |
| 12 | MAC address | R | Get MAC address: *#13**12## |
| 15 | Device Type | R | Get Device Type: *#13**15## |
| 16 | Firmware version | R | Get Firmware version: *#13**16## |
| 19 | Uptime | R | Get Uptime: *#13**19## |
| 22 | Date and Time | R/W | Get DateTime: *#13**22## Set DateTime: *#13**#1*H*m*S*T*W*D*M*Y# |
| 23 | Kernel Version | R | Get Kernel Version: *#13**23## |
| 24 | Distribution Version | R | Get Distribution Version: *#13**24## |
The following DIMENSION codes are not mentioned in the official documentation. However when looking at the results of requests using these codes their meaning seems obvious.
| DIMENSION | Description | R/W | Syntax | Comment |
|---|---|---|---|---|
| 17 | Hardware Version | R | Get Hardware Version: *#13**17## | |
| 20 | Micro Version | R | Get Micro Version: *#13**20## | most likely: version of SCS bus micro controller firmware |
| 50 | Gateway IP address | R | Get Gateway IP address: *#13**50## | |
| 51 | DNS IP address 1 | R | Get DNS IP address 1: *#13**51## | |
| 52 | DNS IP address 2 | R | Get DNS IP address 2: *#13**52## |
| VALUE | Description | Info |
|---|---|---|
| H | Hour | 2-digit value |
| m | Minute | 2-digit value |
| S | Second | 2-digit value |
| T | Timezone | |
| W | Weekday | |
| D | Day | 2-digit value |
| M | Month | 2-digit value |
| Y | Year | 4-digit value |
Device Table
| OWN-ID | Device |
|---|---|
| 2 | MHServer |
| 4 | MH200 |
| 6 | F452 |
| 7 | F452V |
| 11 | MHServer2 |
| 12 | F453AV |
| 13 | H4684 |
| 15 | F427 (Gateway Open-KNX) |
| 16 | F453 |
| 23 | H4684 |
| 27 | L4686SDK |
| 44 | MH200N |
| 51 | F454 |
