|
|
| Line 1: |
Line 1: |
| − | To understand the OWN messages better, you should start a monitor session on your Raspberry Pi and watch the OWN messages flying in from your domotic system. Analyzing these messages gives you an idea how it works. Below is a simple monitor script in Python.
| |
| | | | |
| − | start editor nano and create monitor.py
| |
| − | <pre>nano monitor.py</pre>
| |
| − |
| |
| − | Copy and paste the script below into that file and save it.
| |
| − | After you saved the file, you have to make the file executable:
| |
| − | <pre>chmod 755 monitor.py</pre>
| |
| − |
| |
| − | Copy the content of this script to moniotr.py
| |
| − | <pre>#! /usr/bin/python
| |
| − | # -*- coding: utf-8 -*-
| |
| − | import socket
| |
| − |
| |
| − | # IP address and port to connect to the gateway, please attapt to your environment
| |
| − | default_gateway_host = "192.168.60.201"
| |
| − | default_gateway_port = 20000
| |
| − |
| |
| − | gateway_addr_port = default_gateway_host, default_gateway_port
| |
| − |
| |
| − | def monitor():
| |
| − | sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
| |
| − | try:
| |
| − | sock.connect(gateway_addr_port)
| |
| − | data = sock.recv(1024)
| |
| − | # expect ACK from gateway
| |
| − | if data != "*#*1##":
| |
| − | raise Exception("Did not receive expected ACK, but: "+data)
| |
| − | # Switch session to MONITOR mode
| |
| − | sock.send("*99*1##")
| |
| − | data = ""
| |
| − | while 1:
| |
| − | # Read data from MyHome(R) BUS
| |
| − | next = sock.recv(1024)
| |
| − | if next == "":
| |
| − | break # EOF
| |
| − | data = data + next
| |
| − | eom = data.find("##")
| |
| − | if eom < 0:
| |
| − | continue; # Not a complete message, need more
| |
| − | if data[0] != "*":
| |
| − | raise Exception("Message does not start with '*': "+data)
| |
| − | print data
| |
| − | msg = data[1:eom]
| |
| − | data = data[eom+2:]
| |
| − | finally:
| |
| − | sock.close()
| |
| − |
| |
| − | monitor()</pre>
| |
| − |
| |
| − | Now start the monitor and watch the messages fly by. Exit with CTRL-C.
| |
| − | <pre>./monitor.py</pre>
| |
