Code Snippets

From piMyHome Project
Revision as of 08:48, 15 March 2019 by Admin (talk | contribs) (→‎The Python Script btmonitor.py for Python 3)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

If you wanna get a feeling of how you can interact with a Bticino gateway, you should try our code snippets below.

Linux console

The Linux command netcat makes it very easy to send messages from a Raspberry Pi to a Bticino Gateway.

Sending messages to a Bticino Gateway with netcat

Syntax:

echo "<message>" | netcat <gateway-IP> <gateway-port>

For example: turn off light 94 (9.4) on interface 5:

echo "*1*0*94#4#05##" | netcat 192.168.1.55 20000

If your command gets executed, you should get *#*1## (ACK) as a response. If the command fails for some reason, you will get a *#*0## (NACK).


Python

Python is a very powerful scripting language and available for all major operation systems like Linux, Windows and Apple OSX. In MAC OSX and Linux environments, Python is usually pre-installed. If not already installed on your system, please follow these steps:

OS How to install python
Raspberry Pi, Debian, Ubuntu sudo apt-get install python
Windows Download and install Python from python.org
Apple MAC OSX Download and install Python from python.org


Sending messages to a Bticino Gateway with Python

Below is a very simple Python script to send messages to a Bticino gateway. The script sends each command line argument as a single message to the gateway. Syntax:

./btsend.py <OWN-message> <OWN-message> <OWN-message>

For example, turn off light 15 and turn on light 17:

./btsend.py *1*0*15## *1*1*17##

The Python Script btsend.py

#!/usr/bin/python
# -*- coding: utf-8 -*-
import socket
import sys

gateway_host = "192.168.1.35"       # set here the IP of your gateway
gateway_port = 20000                # set here the port of your gateway
 
gateway_addr_port = gateway_host, gateway_port

def send_message(msg):
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    sock.connect(gateway_addr_port)
    sock.send(msg)

for arg in sys.argv[1:]:            # cut off first argument (btsend.py)
    send_message(arg)               # send all arguments as message
    print "Sending " + arg

A Python Monitor Session with Bticino Gateway

To understand the OWN messages better, you should start a monitor session and watch the OWN messages flying in from your home automation system. Analyzing these messages gives you an idea how it works. Below is a simple monitor script in Python. Download monitor.py

The Python Script btmonitor.py

#!/usr/bin/python
# -*- coding: utf-8 -*-
import socket
import sys
 
gateway_host = "192.168.1.35"       # set here the IP of your gateway
gateway_port = 20000                # set here the port of your gateway
 
gateway_addr_port = gateway_host, gateway_port
 
def monitor():
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    try:
        sock.connect(gateway_addr_port)
        data = sock.recv(1024)
        if data != "*#*1##":        # expect ACK from gateway
            raise Exception("Did not receive expected ACK, but: "+data)
        sock.send("*99*1##")        # Switch session to MONITOR mode
        data = ""
        while 1:
            next = sock.recv(1024)  # now read data from MyHome BUS
            if next == "":
                break               # EOF
            data = data + next
            eom = data.find("##")
            if eom < 0:
                continue;           # Not a complete message, need more
            if data[0] != "*":
                raise Exception("Message does not start with '*': "+data)
            msg = data[0:eom+2]     # message is from position 0 until end of ##
            data = data[eom+2:]     # next message starts after ##
            print (msg)
    except:
        sock.close()
        print ("\nSocket connection closed.")
        sys.exit()
 
monitor()                           # start the monitor

The Python Script btmonitor.py for Python 3

In Python 3, socket returns bytes objects and we have to take this into account

#!/usr/bin/env python3
# -*- coding: utf-8 -*-
import socket
 
gateway_host = '192.168.1.35'       # set here the IP of your gateway
gateway_port = 20000                  # set here the port of your gateway
 
def monitor():
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    try:
        sock.connect((gateway_host, gateway_port))
        data = sock.recv(1024).decode()  # decoding byt to string
        if data != '*#*1##':         # expect ACK from gateway
            raise Exception('Did not receive expected ACK, but: '+data)
        sock.send(b'*99*1##')        # Switch session to MONITOR mode
        data = ''
        while 1:
            next = sock.recv(1024).decode()  # now read data from MyHome BUS
            if next == '':
                break               # EOF
            data = data + next
            eom = data.find('##')
            if eom < 0:
                continue;           # Not a complete message, need more
            if data[0] != '*':
                raise Exception('Message does not start with '*': '+data)
            msg = data[0:eom+2]     # message is from position 0 until end of ##
            data = data[eom+2:]     # next message starts after ##
            print (msg)
    except:
        sock.close()
        print ('\nSocket connection closed.')
        exit()
 
monitor()                           # start the monitor