WHO=13 - Device Communication

From piMyHome Project
Revision as of 22:53, 22 November 2014 by Admin (talk | contribs) (→‎Device Table)
Jump to navigation Jump to search

WHO 13 let's you communicate with your gateway or scenario manager.

We start with an Example

To find out what type of gateway and/or scenario manager you have, just send the message *#13**15## to your device, for example:

echo "*#13**15##" | netcat 192.168.60.201 20000

This gives you a similar answer like this:

*#*1##*#13**15*12##*#*1##

My device is shown as 12, looking up in the Device Table below, the device must be a F453AV

ATTRIBUTE Table

ATTRIBUTE Description R/W Syntax
0 Time R/W Get Time: *#13**0##
Set Time: *#13**#0*H*m*S*T##
1 Date R/W Get Date: *#13**1##
Set Date: *#13**#1*W*D*M*Y##
10 IP address R Get IP address: *#13**10##
11 Net mask R Get Net mask: *#13**11##
12 MAC address R Get MAC address: *#13**12##
15 Device Type R Get Device Type: *#13**15##
16 Firmware version R Get Firmware version: *#13**16##
19 Uptime R Get Uptime: *#13**19##
22 Date and Time R/W Get DateTime: *#13**22##
Set DateTime: *#13**#1*H*m*S*T*W*D*M*Y#
23 Kernel Version R Get Kernel Version: *#13**23##
24 Distribution Version R Get Distribution Version: *#13**24##
VALUE Description Info
H Hour 2-digit value
m Minute 2-digit value
S Second 2-digit value
T Timezone
W Weekday
D Day 2-digit value
M Month 2-digit value
Y Year 4-digit value

Device Table

OWN-ID Device
2 MHServer
4 MH200
6 F452
7 F452V
11 MHServer2
12 F453AV
13 H4684
15 F427 (Gateway Open-KNX)
16 F453
23 H4684
27 L4686SDK
44 MH200N
51 F454