WHO=3 - Power Management

From piMyHome Project
Revision as of 19:27, 2 November 2015 by Admin (talk | contribs)
Jump to navigation Jump to search

Automation is quite simple since there are only 3 commands available: UP, DOWN and STOP. Unfortunatelly a status request is not possible, so you never know if your shutters are opened or closed.

Standard Command *WHO*WHAT*WHERE##

Examples:

*2*1*15##        Shutter 15 UP
*2*2*15##        Shutter 15 DOWN
*2*0*15##        Shutter 15 STOP

Standard Request *#WHO*WHERE##

Examples:

*#2*15##       Returns the current status of shutter 15

WHAT Table

WHAT Description
0 Disabled
1 Enabled
2 Forced
3 Remove Forced



DIMENSION Table

DIMENSION Description
0 All dimensions
1 Voltage
2 Current
3 Power
4 Energy



WHO=2 - Automation WHO Table WHO=4 - Heating