WHO=1 - Lighting

From piMyHome Project
Revision as of 01:06, 21 November 2014 by Admin (talk | contribs)
Jump to navigation Jump to search

Standard Message *WHO*WHAT*WHERE##

Examples:

*1*1*23##        Turn on light 23  
*1*0*23##        Turn off light 23  
*1*7*45##        Set dimmer 45 to 70%  
*1*18*37##       Turn on light 37 for 0.5 sec (useful for door opener etc.)  
*1*29*23##       Let light 23 blink for 5 sec (useful as a 'silent' alarm) 
*1*30*45##       Set dimmer 45 up to next level (+10%)  

Status Request *#WHO*WHERE##

Sending a Status Request to the gateway results in a Standard Message reply.

*#1*23##      Request status of light 23   
*#1*45##      Request status of light 45 
*#1*37##      Request status of light 37  

That 45 is a dimmer, we might realize when we get another reply than 0 or 1.


WHAT Table

Value Description
0 OFF
0#x Turn off at x speed
1 ON
1#x Turn on at x speed
2 Set dimmer to 20%
3 Set dimmer to 30%
4 Set dimmer to 40%
5 Set dimmer to 50%
6 Set dimmer to 60%
7 Set dimmer to 70%
8 Set dimmer to 80%
9 Set dimmer to 90%
10 Set dimmer to 100%
11 ON for 1 min
12 ON for 2 min
13 ON for 3 min
14 ON for 4 min
15 ON for 5 min
16 ON for 15 min
17 ON for 30 sec
18 ON for 0.5 sec
19 NO LOAD (dimmer)
20 Blinking for 0.5 sec
21 Blinking for 1 sec
22 Blinking for 1.5 sec
23 Blinking for 2 sec
24 Blinking for 2.5 sec
25 Blinking for 3 sec
26 Blinking for 3.5 sec
27 Blinking for 4 sec
28 Blinking for 4.5 sec
29 Blinking for 5 sec
30 Up one level (dimmer)
30#x#y Up x levels at y speed
31 Down one level (dimmer)
31#x#y Down x levels at y speed
1000 Command translation
Attribute Info
speed 0..255 (0=now, 255=slowest)
level one level = 10% of dimmer
WHERE Address
0 General
1..9 Environment 1 to 9
11..99 Light point 1.1 to 9.9
0110..0915 Light point 1.10 to 9.15
#1..#9 Group 1 to 9


WHO=0 - Scenarios WHO Table WHO=2 - Automation